Tel: 183 8211 0441 Chinese | English

石材锯片

News Center

Product classification

Contact us

Company: Luzhou Parson Tools Co., Ltd..

Address: Luzhou City Longmaitang District Jingzhenhai Jixing Agricultural Products Market

Contact: Mr. Fan

Tel: 1398 2407218

Contact: Ms. Wang

Tel: 1398 2402121

Website: www.lzbaosen.com

Requirements for the use of alloy saw blades

Your current position: Home >> News >> Industry News

Requirements for the use of alloy saw blades

Release date:2018-03-07 Author: Click:

Basic requirements for sandstone jagged teeth

The selection of appropriate equipment according to the design requirements of saw blade.

The machine shall be equipped with safety protection devices, such as protective cover, power-off brake, overload protection.

There are 3 professional operators to install and use, and wear labor clothing, wear protective glasses, ear etc..

The operator can not wear gloves, long hair to work under the cap, and pay attention to the tie and cuffs, to prevent the occurrence of danger.

The far away from the fire and humid environment.


锯片.png


Basic requirements for sandstone jagged teeth

The selection of appropriate equipment according to the design requirements of saw blade.

The machine shall be equipped with safety protection devices, such as protective cover, power-off brake, overload protection.

There are 3 professional operators to install and use, and wear labor clothing, wear protective glasses, ear etc..

The operator can not wear gloves, long hair to work under the cap installation requirements

The main equipment in good condition, no deformation, no jump, fixed firmly, no vibration etc..

Check the blade is damaged, the tooth type is complete, the saw plate is smooth, and there is no other abnormal phenomenon, to ensure safe use.

3. When assembling, it is determined that the direction of the sawing arrow is in accordance with the rotation direction of the spindle.

The saw blade to maintain axis installation, flange chuck and clean flange diameter consistent with blade diameter, ensure the flange and the saw blade closely, set up the positioning pin and screw nut. The size of the flange should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the saw blade.

The equipment before starting, to ensure the safety of the case, a single operation equipment, inspection equipment to move the idling is correct, there is no vibration, the saw blade installed after the first few minutes of idling, without slipping, swinging or jumping after normal work.

Use requirements

The work, should ensure that the workpiece is fixed, the location for the profile with depth direction, so as to avoid abnormal cut, do not apply lateral pressure or curve cutting, feeding smoothly, avoid blade impact contact workpiece, resulting in blade breakage, or workpiece flying accidents occurred.

The work, found abnormal sound and vibration, cutting surface or bad smell, must work, timely inspection immediately terminated, troubleshooting to prevent accidents.

In the start and stop cutting cutting, do not feed too fast, avoid breaking and damage.

If the cutting Aluminum Alloy or other metal coolant to the use of special, to prevent the blade from overheating, paste teeth, and other damage, affect the cutting quality.

The equipment of flutes and slag suction device to ensure smooth, to prevent slag deposition into blocks, affecting production and safety.

Please don't cut the stem, long time continuous cutting, so as not to affect the service life of the saw and the cutting effect; wet cutting, water should be cut, beware of leakage.

Inside, and take care of the tie and cuffs to prevent danger.

The far away from the fire and humid environment.

Related tags:Sandstonejaggedtooth,Cutterheadofgranitemine,Sandstonejaggedtooth

Recent browse:

Related products:

Related news:

  • Online
  • Contact
    13982402121
  • Message
  • Mobile
  • Online consulting